確かな信頼性
670W Vertexモジュール
Trina Solar released a series of testing results on the mechanical reliability of the 670W Vertex module. Covering six tests, including static mechanical load test and five rigorous tests including non-uniform snow-load test, extreme low-temperature mechanical Load test, hail test, extreme DML test and extreme wind tunnel test, the serial testing results achieved an across-the-board verification of the excellent mechanical load reliability of the 670W Vertex modules.
Static Load
Non-uniform Snow Load
Static Loading Under -40℃
Hail Impact
Enhanced Dynamic Load
Wind Tunnel Test
Download the white paper
Non-uniform Snow Load Test
Test modules: 210-670W bifacial and dual-glass modules, clamping installation.
Test result: The critical snow-load of Trina Solar's five modules exceeded 6,600 Pa, getting up to 7,000 Pa, equivalent to the pressure generated by 2.8 meters of snow. After the test, the power degradation is only 0.56%.
Learn More
Enhanced Dynamic Load Test
Test moudle：210-670W single glass module, bolt-mounted in the crossbeam; 210-670W bifacial and dual-glass modules, bolt-mounted/clamping installation.
Test results: 210 mm Vertex 670W dual-glass module has passed the 20,000 cycles, 20-fold extreme testing, the DML reliability of the module has been fully validated.
Learn More
Wind Tunnel Test
Test module：210-670W bifacial and dual-glass modules, Bolt-Mounted, 30° inclination.
Test result: The module remains intact when the wind speed reached 62.6m/s (225.4km/h or 140mph)
Learn More
Static Loading Test Under -40℃
Test modules: 210-670W single and dual glass modules, cross-beam screw installation.
Test result: 5400Pa at front side and 2400Pa at back side under -40°C.
The modules maintain in good appearance without cracks, and the testing of insulation and wet leakage are both passed, with power attenuation of only 0.11%.
Learn More
Hail Impact Test
Test module: 210-670W Single-glass module/ Duall-glass module
Test result: 35MM hail impact resistance with power attenuation of only 0.17%.